(13496) 경기도 성남시 분당구 장미로 42, 406호 (야탑동 342-1, 야탑리더스) (주)세미닉스

A : (342-1 Yatap-dong, Yatap Leaders B/D), Rm 406, 4th Fl, 42 Jangmi-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea.

TEL : +82-31-703-7891 E-mail : sales@seminix.com   COPYRIGTHⓒ 2016 SEMINIX, CO., LTD. ALL RIGHT RESERVED.​

GW-UNI2 Plus

           Lastes Firmware                                             GW_uni2 plus_V1.22.00                            2016.06.08

   

            User's Manuals                                               UM GW-uni2 plus r1.1.pdf                         2015.12.03

 

              ------------------------------------------------------------------------------------------------------------------------------------

GW-uni2 Plus 업그레이드 방법

1. GW-uni2 Plus 최신 펌웨어를 다운 받습니다.
2. GW_uni2 plus_V1.22.00를 실행시켜서 GW-uni2 Plus PC program을 install 합니다.
3. Install후에 GW-uni2 Plus.exe를 실행합니다.
4. GW-uni2 Plus의 전원을 켜고 USB cable을 이용해서 PC와 연결합니다.
5. GW-uni2 Plus PC program에서 ‘USB Connection’ 버튼을 눌러 GW-uni2 Plus와 연결을 합니다.
6. 자동으로 Upgrade가 진행되며 Upgrade가 완료 메시지가 나오면
   GW-uni2 Plus USB cable을 제거하고 전원을 끈 후 다시 시작합니다.

(주의사항)
    Upgrade 진행중에는 GW-uni2 Plus 전원을 끄거나, USB cable을 PC에서서 분리하지 마십시요.
    Upgrade 후에 GW-uni2 Plus의 Pass/Fail 카운팅 값이 영”0”으로 지워집니다.

      -----------------------------------------------------------------------------------------------------

GW-uni2 Plus Upgrade


  Please upgrade the firmware of GW-uni2 Plus into the latest version to solve the existing errors.
  The following steps shows how to upgrade :

1. Please download the latest version of GW-uni2 Plus(GW_uni2 plus_V1.22.00) on Seminix website

   to your PC.
2. Execute "GW_uni2 plus_V1.22.00" file to install the GW-uni2 Plus driver software on your PC.
3. After installation, execute the GW-uni2 Plus driver software(GW-uin2 Plus.exe) and turn on the

  GW-uni2 Plus power switch
   and then connect GW-uni2 Plus with your PC via USB cable.
4. In the GW-uni2 Plus software on PC, click the "USB connection" and then it will upgrade the

   firmware of GW-uni2 Plus automatically.
5. After the firmware upgrade is done, please restart the GW-uni2 Plus (Power off and on).

(Caution)
    DO NOT power off GW-uni2 Plus and DO NOT disconnect USB cable during updating.
    The existing counter values of Pass & Fail on GW-uni2 Plus will be erased with zero ("0").